Stealthbot

[Playlandos]

Hello , that's a thread for Stealthbot help team

The official site is : http://www.stealthbot.net/board/ , for any trouble you can visit the Clan SBs into the Bnet , they are very helpfull (you have to wait until they will pm you)
This tutorial should solve the following common errors:

If you get one of the following errors, please follow step 1 till 3 of the instructions below:

* Version Check Failed
o Version check failed!
[BNET] BNLS has not been updated yet, or you experienced an error. Try connecting again.
* Bad Product Version
o [BNLS] Error! Bad product version.

If you already followed all steps and you get one of the following BNLS errors, please follow only step 3 and try a different BNLS server:

* BNLS Error 10022 (not the run-time error)
o [BNLS] Error 10022: Socket not bound, invalid address or listen is not invoked prior to accept
* BNLS Error 10053/10054
o [BNLS] Error 10053: Connection is aborted due to timeout or other failure
[BNLS] The BNLS server has terminated your connection.
o [BNLS] Error 10054: The connection is reset by remote side
[BNLS] The BNLS server has terminated your connection.
* BNLS Error 10060/10061/10065
o [BNLS] Error 10060: The attempt to connect timed out
[BNLS] The server took too long to respond to your computer. The BNLS server appears to be unreachable at this time.
o [BNLS] Error 10061: Connection is forcefully rejected
[BNLS] The server you're connecting to is currently down. The BNLS server appears to be down at this time. Please keep trying, or wait an hour or so and try again.
o [BNLS] Error 10065: No route to host.
* BNLS Error 11001/11004
o [BNLS] Error 11001: Authoritative answer: Host not found
[BNLS] Your computer is unable to contact the BNLS servers.
o [BNLS] Error 11004: Valid name, no data record of requested type
[BNLS] Your computer is unable to contact the BNLS servers.
* Version disabled (mostly stuck at "[BNET] Checking version...")
o This version of StealthBot has been disabled.
Please visit http://www.stealthbot.net for more information and to download an updated version.
If you are receiving this message in error, please check your firewall settings, especially programs such as Norton Internet Security. NIS is notorious for blocking the connection to the BNLS server.

To update your bot please take the following steps:

Step 1) Download the proper EXE for the product you are going to use the bot for. Make sure the bot is closed when doing this step.
StarCraft and WarCraft 2: StealthBot v2.6R3.exe (Updated: November 25th 2008)
Diablo II and WarCraft III:StealthBot v2.6R3.exe (Updated: March 19th 2009)
YOU MUST DOWNLOAD THIS FILE EVEN IF YOU THINK YOU ALREADY HAVE IT.
Replace your old StealthBot's EXE with this new one. (Your old StealthBot EXE can be found in your StealthBot folder.)

Step 2) Remove ANY lines in your configuration file that have 'VerByte' in it.
Settings > Edit Files... > Config
Ctrl+F
Type in VerByte and hit enter, if its found delete it, repeat until none are found.
If you do not find any VerByte lines, just ignore this step.

Step 3) Open your config file by clicking Settings -> Edit File -> Config. Find the line [Main] and under it put:
SetBNLSServer=jbls.org

If jbls.org doesn't work for you -- especially if you get one of the above-mentioned BNLS errors --, you can try one of the following servers as well:
SetBNLSServer=hdx.jbls.org
SetBNLSServer=alendar.no-ip.org
SetBNLSServer=distant.no-ip.org

More servers are listed in the JBLS server list.

Notes:

* In order to make this work, you must have selected "BNLS - Battle.net Logon Server" in your Advanced Connection Settings and not "ADVANCED - Local hashing". It should be set to BNLS by default though.
* If you are using Windows Vista, Windows Server 2008, or any other operating system that uses the User Account Control (UAC) system, and are having trouble finding your config file or if it appears empty to you, this tutorial might help you: Microsoft Windows Vista UAC.
* For Starcraft read also the following news topic: Starcraft on Bots.
I found them at : http://www.stealthbot.net/board/index.php?showtopic=11542 [B]For every update you must visit this site

[Playlandos]

Your WarCraft III bots will drop after 2 minutes due to Warden as well now. Any posts about this will be deleted with out a second glance.
I have released my Warden Proxy application, which will allow StealthBot and other bots with SOCKS4 proxy support to maintain a connection on WarCraft III, despite Warden.

The fix can be downloaded here, however we will NOT support it.

Any and all requests for support using the proxy will be trashed.

To use:

1. Extract the files to a directory on your computer.
2. Run Warden.exe (and keep it running).
3. Set your bot to use the bypass as a proxy: Set the proxy IP address to 127.0.0.1 or localhost, proxy port to 6111 (default port) and type to SOCKS4.
4. Set the server you are connecting to an IP address under the servers domain. For example: if you are connecting to useast.battle.net select one of the numbered IPs such as: 63.240.202.139
5. Connect.

Thanks go to Ringo, iago, and various others over at vL for all of their hard work, and of course, Hdx for putting it together for you to use.

Notes:

* The bypass only supports 1 bot. If you want to run several bots, you have to run multiple instances of the program. It is recommended to make separate folders and set each bypass to use a different port.
* If you get an error after reconnecting your bot, restart the application.
* The program collects statistics about the users. It does not save any personal or private information though. If you feel not comfortable with this, simply don't use it.

Change Log:
//010000 - Initial Release
//010001 - Fixed TFT issues
//010002 - Fixed Socks 4 username issues
//010003 - Beleived I fixed 'Unknown Opcode' errors
//010004 - Will now hide the main form if it gets to Warden 0x02 and show the form if the bot disconnects
//010005 - Fixed problem when client disconnected improperly

Download Warden

http://www.megaupload.com/?d=LUG23Z6H

New version Warden

http://brownnoise.net/lex/warden/010006.zip

[FrozenWarrior]

Ι have this problem:

[7:19:52 μμ] [BNLS] Connecting...
[7:19:52 μμ] [BNLS] Connected!
[7:19:52 μμ] [BNLS] Authorized!
[7:19:52 μμ] [BNET] Connecting...
[7:19:53 μμ] [BNET] Connected!
[7:19:53 μμ] [BNET] Checking version...
[7:19:54 μμ] [BNET] Version check failed!
[7:19:54 μμ] [BNET] BNLS has not been updated yet, or you experienced an error. Try connecting again.
[7:19:54 μμ] All connections closed.


what can i do for make it?

[Playlandos]

First of all translate it :D it's an english section , well you will go there

http://www.stealthbot.net/board/index.php?showtopic=11542

and you will download the latest version of stealthbot and then you will go at the Settings ---> Edit Files ----> Config File ---> and under the [Main] you will create this :
SetBNLSServer=jbls.org

To work the whole bot you have to open the warden first and then to use Proxy server and then connect

[FrozenWarrior]

thank you very much playlandos.

i managed to fix it.

[touloumpinios]

file exo mia aporia pos sundeeis to HB me to stealth bot etsi oste na sapmmarei ta game sto channel π.χ τα bot tou eleos .se parakalo help me